Shenzhen fuweite welding machine Co., Ltd., a Taiwan funded enterprise, is a large domestic welding equipment manufacturer. It independently develops and produces various welding equipment, such as spot welding machine, intermediate frequency spot welding machine, inverter welding machine, touch welding machine, precision resistance welding machine, etc.
Product Description:
◆It can output 1500 solder joints per minute;
◆1kHz, 2KHz, 4kHz, 8kHz, 10kHz, 20kHz inverter frequency, high control accuracy, welding time can be accurate to 0.25ms or 0.125ms;
◆LCD display intuitive, touch LCD display, easy to operate;
◆With perfect interface function and RS232 communication interface, it is suitable for all kinds of special machines;
◆Constant current, constant voltage, constant power, constant pulse width and other control modes are suitable for welding of various materials and products;
◆Three stage heating mode, current slow rise and slow drop control;
◆Set the upper and lower limits of parameters monitoring;
◆Product models are complete, wide range of applications.
Specification and model of intermediate frequency inverter welding machine:
| model | JYD-01L/01AL | JYD-02L/02AL | JYD-03/03AL | JYD-04LB | JYD-06AL/AT | JYD-10AL/AT |
| input voltage | 220V/380V | 220V/380V | 220V/380V | 380V | 380V | 380V |
| Rated power | 4 | 6 | 10 | 12 | 16 | 25 |
| Output current | 1000 | 2000 | 3000 | 4000 | 6000 | 10000 |
| Load duration | 20 | 20 | 20 | 10 | 10 | 10 |
| Inverter frequency | 8 | 8 | 8 | 8 | 1 | 1 |
| Welding cycle section | 11 | 11 | 11 | 11 | 11 | 11 |
| Pulse number weldin | 3 | 3 | 3 | 3 | 3 | 3 |
| Slow rise and slow down | Yes | Yes | Yes | Yes | Yes | Yes |
| Number of welding specifications | 20 groups | 20 groups | 20 groups | 20 groups | 20 groups | 20 groups |
| Dimensions | 435*185*320 | 435*185*320 | 435*185*320 | 460*400*300 | 460*222*345 | 460*222*345 |
| 385*200*300 | 385*200*300 | |||||
| weight | 18 | 20.5 | 22 | 33 | 23.5 | 26 |
| 19 | 22 | 24 | 26.5 | 30 |
Features of high frequency inverter resistance spot welding machine:
1. The welding current is pulsating DC (with small ripple); the inverter frequency is 1-8khz, the power on time control cycle is 0.125ms, and the discharge time can be adjusted and controlled arbitrarily;
2. It can monitor current, voltage and power in real time;
3. It has the function of fault diagnosis and alarm such as current abnormality, monitoring value overrun, network voltage overrun, overheat, etc., which can greatly reduce the defective rate of product welding.
4. Three stage heating setting, with the function of slow rise and slow drop of current, can effectively solve the "spatter" and ensure the stability of welding.
5. The electrode life can be effectively prolonged. Energy saving is more than 50%.
Intermediate frequency inverter spot welding machine is especially suitable for the following industries or high requirements of materials welding:
Auto parts auto electronics auto electrical
Electric light source
Various types of inductance enameled wire
Smart card | contactless IC chip enameled wire welding
Nickel plate and combined battery
Precision enameled wire welding
Electroacoustic device receiver horn enameled wire welding
Network filter module | network transformer enameled wire welding
Precision hardware welding
wait
Also suitable for all kinds of automatic welding equipment!
